Showing all 4 results
Ip65 waterproof panel led for cleanroom, very thin (11mm), specially designed for application in cleanrooms. IP65 from the top and bottom, resistant to hydrogen peroxide, surface mounted allowing an aesy sealing. Wide range of flux, from 1500 to 7000 Lm. The optical assembly consists of a reflective sheet incorporating Toray's Lumirror technology, a Mitsubishi PMMA light guide and a Chimei white polystyrene diffusing film.
Combined 4000 K white and 630 nm red led panel. Waterproof IP65 for cleanroom, very thin (11mm), specially designed for application in cleanrooms. IP65 from the top and bottom, resistant to hydrogen peroxide, plated on the underside to make a joint. Wide flux range, from 1500 to 8000 Lm.
The optical assembly consists of a reflective sheet incorporating Toray's Lumirror technology, a Mitsubishi PMMA light guide and a Chimei white polystyrene diffusing film.
low glare IP40 LED panel, low thickness for flush mounting, protrusion or suspension.
Optical unit illuminated by the wafer, the materials used ensure an optimum efficiency of the luminaire, up to 96Lm / W.
MP version equipped with a micro-prisms plate for a better visual comfort, UGR lower than 19.
Products designed in France and manufactured in Europe, multi-power electronic power supply of Osram brand or equivalent.
LED recessed cleanroom lighting fitting, IP65, with opal diffuser PMMA or polycarbonate. Access from below.
Body in thick sheet steel, white lacquered by polyester powder coating. Aluminum lower frame, 4 stainless steel clamping screws.