Product Description
low glare IP40 LED panel, low thickness for flush mounting, protrusion or suspension.
Optical unit illuminated by the wafer, the materials used ensure an optimum efficiency of the luminaire, up to 96Lm / W.
MP version equipped with a micro-prisms plate for a better visual comfort, UGR lower than 19.
Products designed in France and manufactured in Europe, multi-power electronic power supply of Osram brand or equivalent.
Features
Documentation
Additional Information
| IP | 40 |
|---|---|
| IK | 6 |
| CE | CE, EN60598 |
| Glow wire | 650 |
| Life time | 50000 |
| Aging | L80b10 |
| Photobiological risk | no |
| Source | IED |
Product Description
Download all the information concerning the IDA range, low glare IP40 LED panel :
Related Products
Low glare cleanroom led luminaire with louver and protective glass, IP65. Access from the top.
Body in thick sheet steel, white lacquered by polyester powder coating. Upper steel clamping frame. Bright red superior hood.
Combined 4000 K white and 630 nm red led panel. Waterproof IP65 for cleanroom, very thin (11mm), specially designed for application in cleanrooms. IP65 from the top and bottom, resistant to hydrogen peroxide, plated on the underside to make a joint. Wide flux range, from 1500 to 8000 Lm.
The optical assembly consists of a reflective sheet incorporating Toray's Lumirror technology, a Mitsubishi PMMA light guide and a Chimei white polystyrene diffusing film.
Waterproof luminaire with LED module, IP66. For indoor or industrial indoor lighting under shelters. High mechanical strength. LED module integrated into the board, expected life of 50,000 hours.
Diffuser polycarbonate crimped and connector Wieland 3-pole delivered as standard, depending on the models.
Compact recessed luminaires for cleanrooms, access from below, IP65, with intensive, semi-extensive or extensive photometric distributions. Diffusers in polycarbonate or pmma.
Body in thick sheet steel, white lacquered by polyester powder coating. White lacquered aluminum frame secured by safety clip.
IP65 cleanroom LED recessed low glare luminaires with aluminium louver and protective glass. Access from below.
Body in thick sheet steel, white lacquered by polyester powder coating. Frame in white lacquered aluminum, screwed on the box by 8 stainless steel screws.
Recessed led cleanroom luminaire.Mounting on sandwich panel with cut-out. Once mounted, the luminaire is flush above and below the ceiling and its cover is walkable. The standard version allow access to the equipment from above. In the HB Version, access is possible from above and below.
LED recessed cleanroom lighting fitting, IP65, with opal diffuser PMMA or polycarbonate. Access from below.
Body in thick sheet steel, white lacquered by polyester powder coating. Aluminum lower frame, 8 stainless steel clamping screws.
LED module lights for short duration explosive atmospheres, suitable for type 2 and 22 areas according to the ATEX 94/9 EC directive. Available with 3H Emergency Kit. The use of LEDs significantly reduces maintenance frequency, a major advantage in areas of limited accessibility.
IP66, indoor or outdoor installation under shelter.
SIRIUS, surface cleanroom led lighting fitting. Low profile Inverted pyramidal body to reduce particle accumulation.
Low profile 38mm, built-in power supply.
LED retrofit kits for cleanroom RADIUM HB OPV from SEAE OR DAGVO from dagard with access from above and from below. The implementation of this kit is fast and does not interrupt the activity in the clean room.
Easy to implement: disconnect and remove the plate / compact fluorescent cover, place the kit in place, the same size and the same fixing points. Connection of the kit by waterproof Wieland connector RST20i. Reduced operating time. The functionality of access to the equipment from above or below is maintained.
Recessed compact waterproof led luminaires for cleanroom, polycarbonate or pmma diffusers. Access from the top and the front.
Body in thick sheet steel, white lacquered by polyester powder coating. White lacquered steel clamping frame. Bright red lacquered hood
Range tested by Fraunhofer IPO lab.
Helium is a linear LED high-bay for cleanroom. It can be surface mounted or suspended ans oriented.
Glass diffuser with intensive or extensive flood.
Span life is 100.000 h.
LEDETOG Waterproof LED Extreme Temperature luminaire. Ideal for illuminating coldrooms, the luminaire incorporates a Gore e-vent to evacuate moisture and eliminate condensation. For indoor or industrial indoor lighting under shelters. High mechanical strength. LED module integrated into the board, expected life of 50,000 hours.Diffuser polycarbonate or pmma crimped and connector Stucchi 3 poles delivered as standard, depending on the models.
Luminaires for occasional explosive atmospheres, suitable for zones of type 1,2,21 and 22 according to ATEX directive 94/9 EC.Tube Borosilicate and aluminum alloy tips.T8 fluorescent lamps and compact fluorescent high power 55W. Full flow electronic power supplies, energy category A2.
Recessed led cleanroom luminaire.Mounting on sandwich panel with cut-out. Once mounted, the luminaire is flush above and below the ceiling and its cover is walkable. The standard version allow access to the equipment from above. In the HB Version, access is possible from above and below.
Recessed LED cleanroom lighting fitting, IP65, with opal diffuser PMMA or polycarbonate. Access from the top.
Body in thick sheet steel, white lacquered by polyester powder coating. Top clamping frame in bright red painted steel for better viewing.
SIRIUS YE, low profile surface inactinic cleanroom led lighting fitting. Low profile Inverted pyramidal body to reduce particle accumulation.
Low profile 38mm, built-in power supply.
Ip65 waterproof panel led for cleanroom, very thin (11mm), specially designed for application in cleanrooms. IP65 from the top and bottom, resistant to hydrogen peroxide, surface mounted allowing an aesy sealing. Wide range of flux, from 1500 to 7000 Lm. The optical assembly consists of a reflective sheet incorporating Toray's Lumirror technology, a Mitsubishi PMMA light guide and a Chimei white polystyrene diffusing film.
Recessed cleanroom luminaires with top access, compact, IP65, LED, with intensive or extensive, polycarbonate or pmma diffusers. Wide range of photometric powers and distributions. Body in thick sheet steel, white lacquered by polyester powder coating. White lacquered steel clamping frame.
Recessedled high-bay light for high cleanrooms, access from above. IP65 LED recessed luminaires with intensive light distribution, glass diffuser.
Body in machined monobloc aluminium, white powder-coated in polyester. Clamping frame in bright red lacquered steel and upper cover in bright red lacquered steel.
Walkable luminaire.
Xe54-LED LED recessed luminaire for operating theater, IP65, with low luminance diffuser in polycarbonate, color rendering index higher than 90, very high luminous flux, dimmable power supply.
This range of products allows to illuminate the blocks according to the norms of EN12464.
Body in thick sheet steel, white lacquered by polyester powder coating. Aluminum lower frame, 8 stainless steel clamping screws.
LED retrofit kits for SEAE RADIUM H T8 or T5 cleanroom luminaires with access from the top. The implementation of this kit is fast and does not interrupt the activity in the clean room.
Easy installation: disconnection and removal of the plate / fluorescent cover T8, installation of the kit instead, the same format and the same fixing points. Connection of the kit by waterproof Wieland connector RST20i. Reduced operating time.
